Home > Proudct > Silicone Oils/Emulsions > HC-8566 Silicone oil
HC-8566 Silicone oil
Release time:2022-05-30 Reading times:512

[Product of chemical feature] 

HC-8566 silicone oil is our company according to the quality requirements of the virgin polyester staple fiber from polymer. A silicone oil product with uniform film formation, strong permeability, and good silicone coated, high temperature resistance, no yellowing, smoothness, bulkiness.

[Well-new functions]

HC-8566's smoothness, bulkiness, environmental friendliness, easy to applying and better comprehensive effects.

[Typical properties]

Appearance          milky white liquid

solid content            65%±2 

PH value                 7-8

Ion type             weakly cationic

[Application recommendation]

Spinning line: It is recommended to add 0.2%-0.6% of HC-4018 spin finish oil.

Drawnline: HC-8566 can be mixed with water at the recommended ratio, and the dilution ratio can be adjusted according to the desired effect of the fiber. Both the spraying process and the dipping process are applicable.

[Notes]

1) Water quality requirements: conductivity below 0.98us/cm, hardness below 3.1mg/L (as CaCO3), pH 7.0-8.0.

2) This silicone oil is used for fiber production. Before using this silicone oil for other purposes, please test the suitability and use it carefully.

3) All chemicals may have adverse effects on the environment and human body. For details, refer to the standard for safe use of chemicals.

4) This silicone oil will freeze when it is below 0 °C. It will be completely dissolved by heating it to 20-30 °C before use, and it will not affect the quality.

5) Pay attention to the oven and exhaust as much moisture out of the workshop as possible.

6) The shelf life of this product is 6 months. Easy to transport.